Insights
Short, practical guides for procurement, HSE and project teams, based on current standards.
IlustrasiGuide to marine fuels in Indonesian waters: HSD and B-blends, FAME-free MGO, Pertadex, VLSFO and MDO, IMO 2020 sulphur rules, bunkering methods and requests.
Avenix Team
7 min read
Archive
PPE procurement guide for factories and contractors in Bintan: PPE categories, EN and ISO standards, purchase list checklist, vendor documents and how to order.
Avenix Team
6 min read
IlustrasiGuide to vessel charter types: time, voyage, bareboat, spot, project-based and long-term contracts, plus when to use tugboats, tug & barge, SPOB and bulk vessels.
Avenix Team
7 min read
Membrane waterproofing for building exteriors: liquid vs sheet membranes, application steps, common mistakes and choosing a system for Batam's climate.
Avenix Team
4 min read
IlustrasiGuide to site safety helmets: types and materials, helmet colour codes, EN 397, EN 50365 and ANSI Z89.1, how to wear and inspect them, and when to replace.
Avenix Team
9 min read
IlustrasiEN 361 full body harness guide: A-marked attachment points, fall arrest system parts (EN 355, EN 362, EN 795), fall clearance, sizing, and pre-use inspection.
Avenix Team
8 min read
IlustrasiHow to choose an annular cutter (HSS vs TCT, diameter, 35/50 mm depth, pilot pin) and a magnetic drill (capacity, magnet force, low profile, tapping) for steel plate.
Avenix Team
6 min read
IlustrasiMagnetic drill and annular cutter maintenance: daily checks, slide lubrication, carbon brushes, magnet base, coolant, cutter storage, and troubleshooting.
Avenix Team
6 min read
IlustrasiPPE types under Indonesian Permenakertrans PER.08/MEN/VII/2010 and the standards behind them (EN 166, EN 388, EN 361, EN ISO 20345) for construction and shipyards.
Avenix Team
6 min read
IlustrasiWhat S1, S1P, S2, S3 and the SRC, HRO and WR symbols mean on EN ISO 20345 safety shoes, and how to choose for construction sites, factories and shipyards.
Avenix Team
6 min read
IlustrasiShipyard PPE checklist by area: welding, confined spaces, work at height, blasting and painting, work over water, with inspection and replacement criteria.
Avenix Team
5 min read
IlustrasiWhat lockout/tagout (LOTO) means, the six procedure steps under OSHA 29 CFR 1910.147, and essential components such as safety padlocks, hasps, valve lockouts and tags.
Avenix Team
6 min read
Send your requirements (materials, PPE, tools or a project). Our Batam & Bintan team replies on the same business day.